Products
Sell Trade Lead
Trade Lead submitted by szlamplic 
on Sep 18 2008
on Sep 18 2008 supply led uv spot curing system
( Electrical And Electronics)
1：Having the smallest heat radiation
This machinery uses the high energy of 365nm UV-LED, which is different from the illumination way of the former ultrahigh voltage mercury lamp. The photosource produce pure ultraviolet ray without infrared ray. It can complete the curing of the agglutinant without damaging department in the situation, then getting to the high accuracy for the joint of part.
2：Reducing the cost of production
A: Because it uses the illumination way of LED, its life reach to 25000 hours (continuously used), adopting the energy saving designing, only lighting when needs to shine, the physical life above 30000 hours, This machinery uses the high energy of 365nm UV-LED, which is differented with the illumination way of the former ultrahigh voltage mercury lamp. The photosource produce pure ultraviolet ray without infrared ray .it can complete the curing of the agglutinant without damaging department in the situation, then getting to the high accuracy for the joint of part.
B: Contrasting With the high pressure mercury lamp, it can reduce the time of replacing the light bulb. And save the expense of frequently replacing the light bulb, which effectively saves the cost of consumption material.
C: Because adopting the LED illumination method, it consumes the electrical energy only when it illuminates .which effectively saves the consumption of electrical energy.
D: It does not need the output of optical cable, which reducing the losing of optical cable.
E: The machinery approximately does not need to replace any components in the using 5-8 years. Compared with traditional UV illumin, itation machine, which can save the expense about 10,000 every year.
3：Minimum body in the spot source industry
The machinery uses the ultra small fuselage, which is 1/8 of the original high pressure mercury lamp illumination machine. it is not only used in the unit production line ,but also installed in the bantam , in order to more convenient for operation, which used the mathed of drawing out from the fuselag illumination picks.
4：Conforming to the requirement of environmental
Protection and safety, because it does not have the high pressure mercury lamp′s consumption, which can conform to the environmental protection needing.
5：Illumination can output three kinds of spot
Diameters Only to replace the head′s shines of the lens, andit can change the output of the luminous spot the diameter, choosing the most suiting work piece light size from three kind of lens, which may realize the reliable joint.
6：Having four independent control illumination
Heads Four independent control illumination can simultaneously apply in four need single output of independent location, which effectively reduces the equipment disposition, simultaneously, four illumination also can use the computer programming pattern to control the order to shine, further supports the demand of high accuracy joint, and reduces time error which comes from artificial holding.
Specification
Type UVEC-4
UV Lamp Heads Independent Control of 4 Heads
System size Length 145mm，width 85mm，Height110mm
Cooling method Fan cooling
AC Power condition 220V，50HZ
Power AC-adapter：3.3
Environmental temperature 0℃—40℃
Environmental humidity 20%—80%
Weight About 2000g
Specification of UV Lamp Heads
Type LUV—H10
Lens Unit Type LUV—D3 LUV—D4 LUV—D6 LUV—D8
Spot size Φ3mm Φ4mm Φ6mm Φ8mm
Distance between the lens and adhesive 10mm 15mm 20mm 25mm
Light source Wave length 365nm
Output 200mW/ c㎡
Environmental temperature 0℃—40℃
Environmental humidity 20%—80%
Weight About 50g
This machinery uses the high energy of 365nm UV-LED, which is different from the illumination way of the former ultrahigh voltage mercury lamp. The photosource produce pure ultraviolet ray without infrared ray. It can complete the curing of the agglutinant without damaging department in the situation, then getting to the high accuracy for the joint of part.
2：Reducing the cost of production
A: Because it uses the illumination way of LED, its life reach to 25000 hours (continuously used), adopting the energy saving designing, only lighting when needs to shine, the physical life above 30000 hours, This machinery uses the high energy of 365nm UV-LED, which is differented with the illumination way of the former ultrahigh voltage mercury lamp. The photosource produce pure ultraviolet ray without infrared ray .it can complete the curing of the agglutinant without damaging department in the situation, then getting to the high accuracy for the joint of part.
B: Contrasting With the high pressure mercury lamp, it can reduce the time of replacing the light bulb. And save the expense of frequently replacing the light bulb, which effectively saves the cost of consumption material.
C: Because adopting the LED illumination method, it consumes the electrical energy only when it illuminates .which effectively saves the consumption of electrical energy.
D: It does not need the output of optical cable, which reducing the losing of optical cable.
E: The machinery approximately does not need to replace any components in the using 5-8 years. Compared with traditional UV illumin, itation machine, which can save the expense about 10,000 every year.
3：Minimum body in the spot source industry
The machinery uses the ultra small fuselage, which is 1/8 of the original high pressure mercury lamp illumination machine. it is not only used in the unit production line ,but also installed in the bantam , in order to more convenient for operation, which used the mathed of drawing out from the fuselag illumination picks.
4：Conforming to the requirement of environmental
Protection and safety, because it does not have the high pressure mercury lamp′s consumption, which can conform to the environmental protection needing.
5：Illumination can output three kinds of spot
Diameters Only to replace the head′s shines of the lens, andit can change the output of the luminous spot the diameter, choosing the most suiting work piece light size from three kind of lens, which may realize the reliable joint.
6：Having four independent control illumination
Heads Four independent control illumination can simultaneously apply in four need single output of independent location, which effectively reduces the equipment disposition, simultaneously, four illumination also can use the computer programming pattern to control the order to shine, further supports the demand of high accuracy joint, and reduces time error which comes from artificial holding.
Specification
Type UVEC-4
UV Lamp Heads Independent Control of 4 Heads
System size Length 145mm，width 85mm，Height110mm
Cooling method Fan cooling
AC Power condition 220V，50HZ
Power AC-adapter：3.3
Environmental temperature 0℃—40℃
Environmental humidity 20%—80%
Weight About 2000g
Specification of UV Lamp Heads
Type LUV—H10
Lens Unit Type LUV—D3 LUV—D4 LUV—D6 LUV—D8
Spot size Φ3mm Φ4mm Φ6mm Φ8mm
Distance between the lens and adhesive 10mm 15mm 20mm 25mm
Light source Wave length 365nm
Output 200mW/ c㎡
Environmental temperature 0℃—40℃
Environmental humidity 20%—80%
Weight About 50g
 |
Login to contact szlamplic |  |