SPRING LOADED TILLER (USA MODEL)

SPECIFICATIONS:
5 TYNE 7 TYNE 9 TYNE 11 TYNE
FRAME 65x10 mm (Angle) 65x10 mm (Angle) 65x10 mm (Angle) 65x10 mm (Angle)
SPRING 10 mm WD, 50 mm OD 26 Coils 10 mm WD, 50 mm OD 26 Coils 10 mm WD, 50 mm OD 26 Coils 10 mm WD, 50 mm OD 26 Coils
TYNES 50x19 mm (Forged) 50x19 mm (Forged) 50x19 mm (Forged) 50x19 mm (Forged)
PAIRS 50x50x6 mm Angle (Main Steel) 50x50x6 mm Angle (Main Steel) 50x50x6 mm Angle (Main Steel) 50x50x6 mm Angle (Main Steel)
ANCHOR PIN 22 mm 22 mm 22 mm 22 mm
NUTS High Tensile High Tensile High Tensile High Tensile
FRAME BOLT M 12x35 mm (High Tensile) M 12x35 mm (High Tensile) M 12x35 mm (High Tensile) M 12x35 mm (High Tensile)
TYNE BOLT M 16x80 mm (High Tensile) M 16x80 mm (High Tensile) M 16x80 mm (High Tensile) M 16x80 mm (High Tensile)
LINKAGE 3 POINT
50x16 mm (Rear)
65x12 mm (Front)

50x16 mm (Rear)
65x12 mm (Front)

50x16 mm (Rear)
65x12 mm (Front)

50x16 mm (Rear)
65x12 mm (Front)
SHOVEL 55 x 10 mm EN-45 55 x 10 mm EN-45 55 x 10 mm EN-45 55 x 10 mm EN-45
LENGTH 1168 mm 1676 mm 2185 mm 2692 mm
WIDTH 940 mm 940 mm 940 mm 940 mm
HEIGHT 533 mm 533 mm 533 mm 533 mm
WEIGHT 140 Kg. 180 Kg. 225 Kg. 280 Kg.